-40%

Agilent 8164B Lightwave Mainframe w/ 81600B Tunable Laser, 81634B & 81610A CAL'D

$ 17160

Availability: 100 in stock
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Condition: Used
  • MPN: 8164B / 81600B / 81634B / 81610A
  • Brand: Agilent
  • Model: 8164B / 81600B / 81634B / 81610A
  • Restocking Fee: No

    Description

    Powered by
    Frooition
    Shop Categories
    Amplifiers
    Analyzers
    Cable & Antenna Analyzers
    Cables
    Calibration Kits
    Calibrators
    Counters / Timers
    Detectors
    Emulators
    Error Detectors
    Logic Analyzers
    Meters
    Modules / Plug Ins
    Multimeters
    Network Analyzers
    Noise Generators
    Noise Sources
    Optical
    Optical Spectrum Analyzers
    Oscilloscopes
    Other
    Pattern Generators
    Power Meters
    Power Sensors
    Power Supplies
    Probes
    RF / Microwave
    Service Monitors / Test Sets
    Signal Analyzers
    Signal Generators
    Spectrum Analyzers
    Thermal Imagers
    VXI
    We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
    Agilent 8164B Lightwave Mainframe with 81600B Tunable Laser, 81634B Power Sensor & 81610A Return Loss Module
    Item Description
    Agilent 8164B Lightwave Mainframe with 81600B Tunable Laser, 81634B Power Sensor & 81610A Return Loss Module - CALIBRATED!
    You are bidding on an Agilent 8164B Lightwave Mainframe with 81600B Tunable Laser with Options 072 (PMF, angled contact output connector) and 160 (All-band Tunable Laser Source 1495 nm to 1640 nm, low SSE), an 81634B Power Sensor and an 81610A Return Loss Module. This lightwave measurement system will arrive with a fresh calibration performed by an ISO 17025 accredited lab. The Agilent 8164B Lightwave Measurement System is the ideal mainframe for test solutions of fast and accurate optical applications because it hosts one of Agilent high end tunable laser sources and up to 4 compact modules.
    The Keysight 81600B Tunable Laser Source Family comprises the most versatile and high performance tunable laser sources on the market. It allows WDM developers and manufacturers to dramatically reduce test cost, and increase profits by quick return-on-investment. The Keysight 81600B family enables the most precise characterization of advanced optical components with its fast and accurate sweep across the entire wavelength range and specified accuracy during the sweep. Signal output with low spontaneous emission (SSE) permits measurement of filters with highest dynamic range.
    The Keysight 81634B optical power sensor is the right choice for accurate power measurements on fiberoptic devices. The modular sensor fits into all Keysight 816x Lightwave mainframes and can be used singly or in multiples for parallel measurements of multichannel devices. The input fiber is easily attached using Keysight's flexible connector adapters or bare-fiber adapter
    The module can run measurement applications like data logging, stability and recording minimum and maximum values over time. Triggered synchronization with tunable laser modules enables powerful spectral measurements, with the advantages of higher resolution, better polarization dependence and cost-and-time-efficient multichannel expandability. The module logs up to 20,000 samples with averaging time as low as 100µs.
    Keysight's 81610A Return Loss module is the tool of choice for measuring return loss (RL) and reflection of single-mode fiberoptic components. The module measures the optical power into and reflected back from the device under test and calculates and displays the return loss. Thorough built-in functionality provides the correct coupling and detection ratios and eliminates the effects of dark current and residual backscatter in the instrument setup to provide accurate measurements over a wide dynamic range.
    The Return Loss modules can be used in any 816x Lightwave mainframe and an external fixed-wavelength or tunable laser source. The performance and usability is enhanced by combination with a Keysight power sensor in the 8163B mainframe for simultaneous RL and insertion loss measurements, especially in combination with the 81610CC calibrated reference cable. Automated use is supported by the 816x Plug&Play Driver, which also supports use of the module for advanced swept-wavelength RL measurements.
    Agilent 81600B Features:
    Highest measurement range through low spontaneous source emission (low SSE), Signal to SSE Ratio >70 dB/nm
    Variable sweep speed up to 80 nm/s
    Wide tuning range units to cover all transmission bands: 1260 nm – 1640 nm
    Built-in wavelength meter with excellent wavelength accuracy ±3.6 pm
    High optical output power up to +9 dBm with built-in high performance 60 dB attenuator
    Agilent 81634B Power Sensor Features:
    Low power uncertainty of ±2.5%
    Low polarization dependence of <±0.005 dB
    High sensitivity of -110 dBm
    Traceable to NIST and PTB
    Agilent 81610A Return Loss Module Features:
    Return loss dynamic range > 70 dB
    Return loss uncertainty down to ±0.25 dB with broadband source
    Wide operating wavelength range: 1250nm to 1640nm
    Built-in Power Monitor
    Built-in step-by step guided wizard with 8163B mainframe
    This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
    Insurance is included in UPS shipping charges.
    Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
    We will accept payment for this item by company check, cashier’s check and wire transfer only.
    If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction.
    Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
    Please note that shipping and insurance costs are non-refundable.
    Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
    Make sure that you check out
    our other auctions
    for more great deals on test and measurement equipment.
    Thank you and good luck bidding
    Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
    About Us
    About Us
    Payment
    Shipping
    Terms
    Returns
    About Us
    Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
    Payment
    Payment
    We accept payment by company check, bank transfer and Paypal (for items valued below 00 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request. Spaulding Surplus 12829 Landale Street Studio City, CA 91604.
    Shipping
    Shipping
    All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
    Terms
    Terms
    All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment.
    Returns
    Returns
    All Ebay items can be returned for a full refund within 30 days of purchase should they not function as intended, unless they are being sold AS IS with known defects. Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer. PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.  WE KINDLY REQUEST THAT BUYERS CONTACT US FIRST SHOULD THERE BE ANY PROBLEMS WITH THE ITEM PURCHASED, RATHER THAN FILING A "NOT AS DESCRIBED" CLAIM WITH EBAY OR IMMEDIATELY LEAVING NEGATIVE FEEDBACK. WE HAVE BEEN IN BUSINESS FOR OVER 15 YEARS AND ALWAYS STRIVE FOR PERFECT FEEDBACK AND INTEND TO PROVIDE QUALITY EQUIPMENT AND EXCELLENT CUSTOMER SERVICE TO ALL OF OUR CUSTOMERS. IF YOU EVER HAVE A PROBLEM WITH A TRANSACTION WE WILL MAKE IT RIGHT!
    Helpful Links
    Add to Favorite Sellers
    Sign up to Newsletter
    View Feedback
    Contact Seller
    Visit seller's eBay Shop
    About Seller Page
    Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
    More Items!
    View more great items
    Powered by
    Frooition
    Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
    This listing is currently undergoing maintenance, we apologise for any inconvenience caused.