MVP High Quality 36 Grit Anti-Slip Grip Tape 2 x 60' Flat Black-Made in the USA

Description

This tape is made from coarser 36 grit to give better holding power in when walked on with muddy shoes or boots.
Anti-slip from any direction, wet or dry, cuts risks of slips or falls
Quick and easy to apply. Installs in seconds on any dry, clean, smooth surface. Just remove the protective liner from the underside to expose the special pressure-sensitive adhesive, then apply in the proper position and roll or press in place.
Economical.
Resistant to solvents.
Durable.
Each piece has a heavy coating of pressure-sensitive adhesive especially formulated for a superior bond to practically any clean, dry, smooth surface.
Indoor and outdoor applications.
Flexible: Bends over sharp 90° angles without fracture. Repeated bending without cracking or failure of bond.
Application: Substrate temperature must be above 50°F.
Temperature Limits: Applied this has a useful temperature range of -40°F to 220°F. However, limited exposure to temperatures above 220°F will not harm it.
Steam Cleaning: Will tolerate steam cleaning.
Detergent Cleaning: Will tolerate detergent cleaning.
Environmental Resistance: Essentially unaffected by climactic exposure and mild acid or alkali exposure under normal conditions.
Shelf Life: Shelf life is two years minimum.
Resistance: Motor Oil – Detergent – Hydraulic Oil – UV Resistance.
Peel Adhesion: MIL-D-17951E(SH): Adhesive strength 0.75 lbs. (minimum) .
MIL-W-5044C: Adhesion lb./in. Width Type IV – 3 lbs. (minimum).